Setup For Ipod / Iphone Or Smartphone; The Basic Flow Of Ipod / Iphone Or Smartphone Setup; Setting The Device Connection Method; Ipod Compatibility - Pioneer AVH-X5700BHS Mode D'emploi

Setup for iPod / iPhone or smartphone

When using an iPod / iPhone or a smartphone with this product,
configure the settings of this product according to the device to
be connected.
This section describes the settings required for each device.
The basic flow of iPod / iPhone
or smartphone setup
1 Select the method for connecting your device.
 Setting the device connection method on page 16
2 Connect your device to this product.
 Connection on page 49
3 If necessary, connect your device to this product via
Bluetooth connection.
 Registration and connection of Bluetooth device on page
12
Setting the device connection
method
To use the application for iPhone or smartphone on this product,
select the method for connecting your device.
Settings are required according to the connected device.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [Smartphone Setup].
4 Touch the following settings.
●
Device: Select the device to be connected.
●
Connection: Select the connection method.
 Information on the connections and functions for each device
on page 17
The setting will change after the following processes are
automatically executed.
— The source is turned off.
— MirrorLink mode is exited.
— The smartphone connection (USB and Bluetooth) is
disconnected.
16

iPod compatibility

This product supports only the following iPod models and iPod
software versions. Others may not work correctly.
●
iPhone 4, 4s, 5, 5s, 5c: iOS 7.0 or later.
●
iPhone 3GS: iOS 6.0.1
●
iPod touch (4th, 5th generation): iOS 6.0.1
●
iPod touch (3rd generation): iOS 5.1.1
●
iPod touch (2nd generation): iOS 4.2.1
●
iPod classic 160GB (2009): Ver. 2.0.4
●
iPod classic 160GB (2008): Ver. 2.0.1
●
iPod classic 80GB: Ver. 1.1.2
●
iPod nano (7th generation)
●
iPod nano (6th generation): Ver. 1.2
●
iPod nano (5th generation): Ver. 1.0.2
●
iPod nano (4th generation): Ver. 1.0.4
●
iPod nano (3rd generation): Ver. 1.1.3
p You can connect and control an iPod compatible with this
product by using separately sold connector cables.
p Operation methods may vary depending on the iPod model
and the software version.
p Depending on the software version of the iPod, it may not be
compatible with this product.
For details about iPod compatibility with this product, refer to the
information on our website.
This manual applies to the following iPod models.
iPod with 30-pin connector
●
iPhone 3GS, 4, 4s
●
iPod touch 2nd, 3rd, 4th generation
●
iPod classic 80GB, 160GB
●
iPod nano 3rd, 4th, 5th, 6th generation
iPod with Lightning connector
●
iPhone 5, 5s, 5c
●
iPod touch 5th generation
●
iPod nano 7th generation
Android device compatibility
™
p Operation methods may vary depending on the Android
device and the software version of the Android OS.
p Depending on the version of the Android OS, it may not be
compatible with this product.
p Compatibility with all Android devices is not guaranteed.
For details about Android device compatibility with this product,
refer to the information on our website.

MirrorLink device compatibility

p This product is compatible with MirrorLink version 1.1.
p Compatibility with all MirrorLink devices is not guaranteed.
For details about MirrorLink device compatibility with this
product, refer to the information on our website.