Safety Pin (Small) - Prophete 2902 Notice D'utilisation

INSTALLATION OF THE CONNECTION BET-
WEEN THE TRAILER AND THE BIKE AT THE
AXLE
1. Screw the towbar to the middle hole
of the towbar holder with its rear
hole. Put the towbar in the move-
ment position and insert and attach
the safety pin through the front ho-
les.
2. Unlock the front coupling part by
pulling out the safety pin and attach it
to the left side of the rear wheel axle.
3. Before starting your ride, connect the
coupling part of the tow bar to that of
the bike and secure it with the safety
pin.
4. Guide the safety belt around the strut
of the rear wheel and attach it to the
safety eyelet of the towbar.
ASSEMBLY
25