Steba ZP 3 Mode D'emploi page 10

∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mold formation.
Cleaning
Attention! Pull the plug before cleaning
∙
∙ Never immerse the unit into water.
∙ Food residues must be removed for reasons of hygiene.
∙ The holding cap for the fruit halves can be removed by gently
pressing the black button on the lever-arm. Remove all other
parts such as juice cone, filter insert and drip tray and clean ev-
erything in light soapy water and let dry thoroughly.
∙ Take care that the juice cones are cleaned from bellow, too, and
that the sieve openings are cleaned completely, too.
∙ The motor base should be wiped with a damp cloth.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable and a heat resisting surface. It is
important that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
10