- GB -
-
GB
-
Information about these operating instructions
You made a good choice with the purchase of this product NCTP-O 300i.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Important information for trouble-free operation.
A
Reference to one or more figures. In this example: Reference to Fig. A.
→
Reference to another section.
Product Description
NCTP-O 300i pumps are designed for water features.
• Suitable for indoor use.
• Simple regulation of the water volume.
• 13 mm (½ '') hose connection.
Delivery scope and unit configuration
Delivery
A
NCTP-O 300i
Quantity
1
1
2
1
3
2
Intended use
NCTP-O 300i, referred to in the following as "unit", may only be used as specified in the following:
• For operation with clean water.
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit to convey fluids other than water.
• Never run the unit without water.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
• Do not connect to the domestic water supply.
8
GA_Bauhaus NCTP-O 300i.pdf 8
Description
Motor housing
Pump casing with outlet
Suction cups
17.02.2014 17:17:30