Blumfeldt 10035216 Mode D'emploi page 32

EN
32
TROUBLESHOOTING
Trouble
The heater does not
turn on
The flame don't start
up.
Smoke during ignition
Possible cause
Pyrolysis has not
started correctly.
Wet pellet.
Failure to comply
with the indications
concerning the
installation and use of
the heater.
The flame reducer is
missing.
Unsuitable igniters.
Solution
Check that the used
ecological igniter has
not been switched off,
if it is so to add more of
it so that its quantity is
adequate and turn it on
again making sure that
its combustion is well
started before closing
everything.
Change the wood
pellets especially if the
package was open for
some time, without
throwing it, but maybe
reusing it once it has
dried well. place again
some ecological fire
ignites ensuring their
correct ignition.
Read carefully this
manual and correct
possible errors in
installation.
Meticulously follow all
instructions.
Place the supplied
flame reducer on top of
the burner correctly.
Be sure to use quality
igniters