Door Reverse - VEDETTE VFM335BRW Manuel D'utilisation

DOOR REVERSE

The side at which the door opens can be changed, from
the left side (as supplied) to the right side, if the installation
site requires.
Warning! When reversing the door, the appliance must not
be connected to the mains. Ensure that the plug is
removed from the mains socket.
Note: Before you start lay the appliance on its back in
order to gain access to the base, you should rest it on soft
foam packaging or similar material to avoid damaging
the backboard. Stand the appliance upright. Open the
door to take out all door racks (to avoid racks
damaged)and then close the door.
To reverse the door, the following steps are generally
recommended:
1. Screw off the four bolts which
in top left with cross opener and
take off the cover.
2. Screw off the one bolt which in
right hinge cover with cross
opener and take it off.
3. Disconnect the light switch(1)
and take it off.
30cm
-44-
30cm
50-75mm