Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Quick-press 400 Instruction Manual
Contents
1.
Introduction
2.
Safety requirements
2.1
General safety requirements
2.2
3.
3.1
3.2
3.3
4.
5.
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
6.
User code of practice
7.
8.
Thank you for purchasing the Quick-Press 400.
This manual gives you detailed instructions for safe handling of this machine.
Please keep the operating instructions in a safe place, these instructions must accompany the unit at all times.
Should any questions exist in regards to the instructions, comissioning or operation of the Quick-press 400, please contact your local distributor or the
manufacturer directly.
2 Safety requirements
2.1 General safety requirements
Machinery with moving parts always carry a risk of injury and require a high degree of caution.
To avoid risks, please read these instructions carefully before operating this machine.
The Quick-Press 400 may only be used in unobjectional condition.
•
Variations of any kind must be reported to a supervisor immediately.
•
Must be utilized in a clean and workable environment.
•
The working area must be well illuminated.
•
Secure or support large and heavy components against falling while operational.
•
Any oil leakage must be wiped off immediately.
•
Protective clothing required for operating. (Gloves, slip resistant work boots, close-fitting clothes, ear protection and protective eyewear)
•
Machine should never be operated under the influence of alcohol, drugs or medication.
•
Keep children away.
The Quick-press 400 is only to be utilized for its intended and specific functions. häwa GmbH will not be held liable
for any damages resulting from negligence.
Quick-Press 400
2665-0000-10-00
Illustration: Hydraulic punching iron combined with
length-, depth-, and repositioning impact.
9
Publicité
Chapitres
Table des Matières
