Setup/Ip-Router-Module - ELSA LANCOM Business Manuel De L'utilisateur

Setup/IP-router-module

This menu allows you to enter settings for the IP router module. The menu has the
following layout:
/IP-router-module
Operating
IP-routing-table
LAN-filter-table
WAN-filter-table
Proxy-ARP
Loc.-routing
Start-WAN-Pool
End-WAN-Pool
Routing-method
RIP-config
Masquerading
Operating This option allows you to activate or deactivate the IP router module. In the default
configuration, the IP router module is activated.
Activating the IP router module also activates the TCP/IP module.
IP-routing-table The routing table can contain a maximum of 128 entries of destination network
addresses or direct IP addresses with netmasks, and the names or IP addresses of other
local routers. Alternatively, you can enter a setting by means of which packets to specific
destination IP addresses are discarded and are not answered by proxy ARP. This is done
by entering 0.0.0.0 for the name of the responsible router.
The 'Masquerade' field indicates whether the route should be masked or not. The
following options are offered here:
On: IP masquerading is switched on and functions with dynamic assignment of the
IP address by the remote station. In this procedure the router queries the IP address
'0.0.0.0' at the remote station and is assigned a random IP address by the remote
station, which is then used for further processing.
Off: Masquerading is switched off.
Static: IP masquerading is switched on and functions with assignment of a static
IP address previously assigned by the remote station. In this procedure the router
queries the IP address entered under 'Setup/TCP-IP-module' at the remote station
Description of the menu options
IP router module settings
Activates or deactivates the IP router module.
Router table for IP network and remote station assignment
Negative/connect filter table for the TCP/UDP destination ports
of LAN packets
Negative filter table for the TCP/UDP destination ports of WAN
packets
Activates/deactivates the proxy ARP function
Activates/deactivates local routing
Start of the address pool for dynamic address assignment for
remote access
End of the address pool.
Routing method for IP packets
Settings for IP-RIP operation
Settings for IP masquerading
ELSA LANCOM Business
R61