Publicité
Les langues disponibles
Les langues disponibles
User Manual
Operation
Front Panel
Number
Name
1
Power LED
2
HDMI Input
LED
3
HDMI
Output
LEDs
4
Service
5
EDID Switch
6
Downscaling
Switch
Please note: EDID switch should be set to Copy for 4K resolutions to then downscale each port to
1920x1080p.
Rear Panel
Number
Name
1
HDMI
Outputs
2
Optical
Output
3
L/R Output
4
HDMI In
5
DC 5V
This LED will illuminate blue when the unit is connected to the power supply
This LED will illuminate blue when a HDMI source device is connected and
These LEDs will illuminate blue when a HDMI display is connected and
AUTO: Compares all displays EDID settings and outputs the most suitable
and highest resolution possible of all displays
COPY: Copies the EDID of Output 1's display, This resolution will then be
sent to all displays. If no EDID is detected from output 1, output 2's EDID will
be copied. The priority order of this will go from output 1 – 4.
OFF: The signal passes straight through to all outputs
ON: The signals downscales from 4K to 1080p, for use with displays with a
Connect to Toslink (Optical) audio devices for audio extraction
Connect to 3.5mm Stereo audio devices for audio extraction
Connect the 5VDC 1A Multi-country power supply
Function
active
active
For Firmware Updates
maximum resolution of 1080p.
Function
Connect to a HDMI display
Connect to a HDMI source device
English
Publicité
