Profim WALL IN Mode D'emploi page 10

1. Diagram showing the installation of legs (A) in pouffes,
armchairs and tables.
1.1. LEG INSTALLATION
Using the 4 screws lightly attach the upper part of the leg.
Then, tighten all screws using an Allen wrench..
2. Diagram showing the installation of feet (B) in pouffes,
armchairs and table legs and height adjustment.
2.1. FOOT INSTALLATION
Screw the foot into the wall leg.
10
1.2. LEG INSTALLATION
A
element
Attach the leg pipe to the previously attached upper part of the leg
using the end with the opening drilled in its side.
2.2. HEIGHT ADJUSTMENT
A
element
+
B
element
It is possible to adjust the height of the piece of furniture
using the leg pipe.
A
element
A
element
+
B
element