SOLAC PD7632 Mode D'emploi page 11

The data to be entered are within the following
range:
Memory: 1 to 12
•
Gender: Male/Female
•
Height: 100-250cm / 3'03.5´´ - 8'02.5´´
•
Age: 10 to 100 (years)
•
To ENTER yoUR DATA:
Press "SET" to switch on the scales
•
The default values will be displayed on the screen (F)
•
Press the arrows (st) o select your user code
•
(from 1 to 12)
Press "SET" to confirm and to be able to enter the
•
next value.
And so on:
•
Press the arrows (st) to select Gender and
•
press "SET" to store the selected value.
Press the arrows (st) to select Height and
•
press "SET" to store the selected value.
Press the arrows (st) to select Age and press
•
"SET" to store the selected value.
PD7632_bascula.indd 12
Tap or press the weighing scales (A), the screen
•
(F) will display the value "0,0"
The scales will switch off automatically after a few
•
seconds.
NB:
While selecting user parameters, if left idle for 6
•
seconds, the parameter will be automatically re-
corded and memorised, the display (F) will show
"0", which means it will start measuring body fat.
If the display shows "0" when entering the user
•
parameters, press "SET" for 3 seconds to return
to the data selection mode, after which the user
code, gender, age and height can be entered.
MEASUREMENT USING THE BIA METHoD:
Step barefoot onto the scales and make sure to
•
stand without moving, distributing your weight
evenly on both legs and feet on the electrodes (B)
Switch the scales on by pressing "SET" or pres-
•
sing the platform (A) with your foot. The screen will
display the default data or those for the last user.
Press the arrows (st) to select your user code.
•
Step onto the platform, the display will show
•
"0.0". Wait until the weight is stable, remaining
fixed, it will flash once..
The screen will now display "0000", which means
•
that the scales are measuring the remaining va-
riables.
En
8/4/16 6:48