Publicité
Les langues disponibles
Les langues disponibles
Q
UICK CONFIGURATION GUIDE. DT-232
FFT Mode.
-
It is the transmitting mode of the signal. Select among available
values (2 K or 8 K).
Guard Interval.
-
It is the security margin used to ensure that distinct transmissions
do not interfere with one another. Select among available values
(1/4, 1/8, 1/16, 1/32).
Constellation.
-
Constellation used to modulate and transmit the signal. Select
among available values (16 QAM, 64 QAM, QPSK).
Code Rate.
-
Select the suitable code rate. Select among available values
(1/2, 2/3, 3/4, 5/6, 7/8).
Channel BW.
-
It is the bandwidth of the channel. Select among available values
(7 and 8 MHz).
PID Filtering.
-
It has two options:
Mode.
-
When is ON, it filters or removes the services contained in the
PID list. When is OFF, it cancels the filtering of the services
that are on the PID list. All services become selected.
PID List.
-
It shows a list with all services filtered, that is, all services that
will not be transmitted. To filter services, use the option at the
DECODER MPEG-2.
Other Options:
4.4
-
Firmware Version:
Shows the Firmware version of the module.
-
Save:
Saves all changes made and validate.
02/2011
Page 11
Publicité
