Publicité
Les langues disponibles
Les langues disponibles
At the bottom, the main screen shows the DVB-T Status, the bitrate
used in kilobit per second and the percentage of bitrate used relative to the
total available.
The DT-232 module adjusts the compression rate to the total bitrate
available, using the modulation parameters.
SPECIFICATIONS
1.1
DVB-S/S2 Input (FI)
Type
Connectors
Frequency range
Input level
Information
LNB Power supply
Voltage
Current
22 kHz signal
Voltage
Frequency
DVB-S2 Parameters (Input)
Symbol Rate
Roll off
Code Rate
Spectral Inversion
DVB-S2 Receiver Parameters
Constellation
Symbol Rate
Roll-off Factor
Code Rate (QPSK)
Code Rate (8PSK)
Spectral Inversion
Decrypting multiples services
Interface
Maximum number of
decrypted services
Page 2
QUICK CONFIGURATION GUIDE. DT-232
2 DVB-S/S2 FI independent inputs.
75 Ω Type- F, Female.
From 950 MHz to 2150 MHz.
40 – 110 dBµV.
MER of the input signal.
OFF, 13 V and 18 V (±1 V).
< 400 Ma.
ON, OFF.
0,65 V ± 0,35 V.
22 KHz ± 4 KHz.
2 – 45 Mbauds.
0.35.
Automatic (1/2, 2/3, 3/4, 5/6 or 7/8).
Automatic (ON, OFF).
QPSK, 8PSK (Auto).
2 – 45 Mbauds.
Automatic (0.20, 0.25 and 0.35)
Automatic (1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4,
4/5, 5/6, 8/9, 9/10).
Automatic (3/5, 2/3, 3/4, 5/6 8/9, 9/10).
Automatic (ON, OFF).
2 independent Common Interfaces.
Depending on the CAM module you use.
02/2011
Publicité
