Publicité
Les langues disponibles
Les langues disponibles
Symbol Rate.
-
It defines the symbol rate of the signal (in kSymb) in order to
match with your signal. It is a numeric field.
DECODER MPEG-2 Options
4.2
DECODER MPEG-2 options are:
Service List.
-
It shows all detected services. Pressing ENTER on a service, you
can select / deselect it. All selected services will be transmitted.
Services (LCN).
-
It is the logic channel number assigned to the first selected service
at the receiver.
PID Filtering.
-
This option allows you to filter the services the user does not want,
by using the PID or Program Identifier of the service you want to
remove. It is a numeric field.
TS ID.
-
Allows you to edit the number that identifies a transport stream. It
is a numeric field.
CAM
-
It shows settings relating to the decoding card.
Firmware Version
-
It displays information about the module.
MODULATOR Options
4.3
The configuration options of the MODULATOR are:
Frequency (KHz).
-
Allow you to edit the frequency of the output signal. It is a numeric
field.
Attenuation.
-
Allow you to adjust the power level of the output signal (in dB). It is
a numeric field.
Page 10
QUICK CONFIGURATION GUIDE. DT-232
02/2011
Publicité
