Pole Connector Replacement; Battery Disposal - Kokido EV40 Manuel D'utilisation

Pole connector replacement

1. Grasp the top round end of the pin. Use a pair of pliers to help with removal if necessary.
2. As the torsion spring will eject as it leaves the pin, be sure to cover the spring with a
piece of cloth as you pull the pin.
3. Insert the pin from one end and place the spring as shown with the help of a pair of
pliers. Ensure the hook is on top and the other end is installed underneath the bench
as shown. Align and insert the pin all the way through the spring hole and opposite
hole.
4. Use a pair of pliers to pull the hook from the bottom of the connector, then fix it onto
the connector as shown. Move the entire spring to the right.

BATTERY DISPOSAL

Your pool vacuum is equipped with a maintenance-free rechargeable lithium-ion battery
pack, which must be disposed of properly. Recycling is required; please contact your
local authority for more information.
WARNING! Never attempt to disassemble a battery pack
 Remove all personal items such as rings, bracelets, necklaces, and
watches when the battery pack is unwired from the pool vacuum.
 A battery can produce a short circuit current high enough to weld a ring (or
similar item) to metal, causing a severe burn in the process.
 Wear complete eye protection, gloves, and protective clothing when the
battery pack is being removed.
 Avoid touching the wires altogether and avoid contact between them and
(To be carried out by authorized technician)
17