Hda 5500 With One Transmitter - Hydac HDA 5500-2-1-AC-000 Notice D'utilisation

HDA 5500
Menu point Setting
Output signal (ouT.M)
Software version (VErS)
Display of the software version (for reference only)
To close basic settings (End)
8 Sensor connection
One analogue input for a transmitter or sensor is always available as standard. On the
models described here one input is also available for digital signals (frequency / counter
function).

8.1 HDA 5500 with one transmitter

Connection example for transmitter with a 4..20 mA sink as input signal,
e. g. HDA 5500-0-2-DC-000 with HDA 4445-A-100-000
(refer to chapter 16 Pin configurations):
HDA 4445-A-...
Connection example for transmitter with a 4..20 mA source as input signal,
e. g. HDA 5500-0-2-DC-000 with EDS 3446-3-0100-000
(refer to chapter 16 Pin configurations):
EDS 3446-3-...
4..20 mA output signal
0..10 V output signal
Basis settings menu closes.
Changed settings are saved.
Basic settings can still be altered.
1
2
3
4
1
2
3
4
User Manual
Setting range Default setting
MA VoLT
VoLT
YES no
no
HDA 5500-...
7
IN1
5
AGND
Input signal sensor 1
HDA 5500-...
7
IN1
5
AGND
Input signal sensor 1:
- 13 -