dirna Bergstrom bycool CAMPER Instructions De Montage page 16

CAMPER
EN
IF VEHICLE IS EQUIPPED WITH ORIGINAL
A
HATCH, THE
(REMOVING
EVAPORATION SYSTEM, IF NOT:
* Position evaporation system on roof, avoiding
friction with solar panels, aerials, etc. and taking
this reference, follow steps described below:
Present frame so that it is centred on roof (from
1
inside of passenger cell) and mark from inside
of outline.
Drill (4) holes on corners of mark from inside of
2
vehicle and join these holes from outside. Cut
padding and false roof (using knife or cutter)
and then cut from outside with jigsaw and using
previously made mark as guide.
! BE
CAREFUL
POSSIBILITY
PASSAGE.
SPACE CAN BE
HATCH) TO ASSEMBLE
WHILE CUTTING,
OF FINDING
USED
CABLES
16
1
2
®
1
2