Tips And Tricks - Cablecom ISDN Mode D'emploi

Description of problem:
I only hear a line busy signal or don't receive any calls
Does the green «ISDN 1» Check the connection between the ISDN telephone
LED of the ISDN adapter and the cable modem according to the
telephone adapter instructions in chap. 2.2.
light up when you lift
the ISDN receiver?
Is the MSN correctly If the green «ISDN 1» or «ISDN 2» LEDs light up when
programmed? you pick up the receiver and you still have problems,
then make sure that you have correctly programed the
MSN with 1 or 2 (for how do this, see your ISDN tele-
phone Operating Manual). If the manual isn't at hand,
you will also find more information in chap. 2.2 of this
Operating Manual. Other examples of programing
MSNs are provided in chap. 6 under «Tips and tricks».
Description of problem:
My digital phone services do not work with the ISDN telephone adapter
Is the desired service Following the instructions in Chap. 2 of your digital
correctly programmed? phone Operating Manual These services are key-
operated under a dual-tone multi-frequency process
(DTMF).
For example: Divert all calls, when line busy (Service 67).
1. Pick up the receiver
2. Enter the following key combination *67*
3. Enter the diversion number and exit by pressing the
hash key #.
4. Wait for confirmation of service activation and put
down the receiver.
The programing of the functions 2.8 «Call waiting»,
2.9 «Hold» and 2.10 «3-way call» is explained in the
Operating Manual for your ISDN telephone. These
services are menu-driven. You will find more tips in
Chap. 4 of this manual.
56 Operating Manual ISDN telephone adapter

6 Tips and tricks

The following scenarios provide examples of how to program multiple subscriber
numbers (MSN) for an ISDN telephone.
You have ordered 2 lines and your numbers are for example:
• Main connection (Line 1): 044 535 1111
• Additional connection (Line 2): 044 535 1112
You have two ISDN telephones (1 Siemens and 1 Philips) and 1 analog fax.
You want the Siemens ISDN telephone to only ring on Line 1 (044 535 1111)
and the Philips telephone only to ring on Line 2 (044 535 1111). You only
want your faxes to be sent and received via Line 2.
First connect the ISDN-TA/analog double plug to «LINE 2» of your modem. Now
connect the RJ11 cable to the RJ11 socket of the ISDN-TA/analog double plug,
subsequently connecting it with «LINE 2» of the ISDN telephone adapter. Then
connect the fax to the TT83 socket of the ISDN-TA/analog double plug. Proceed
with installation as described in Chap. 2.2 of this manual. «LINE 1» of the cable
modem is connected with «LINE 1» of the ISDN telephone adapter via the RJ11
cable as described in Chap. 2.2 of this manual.
Program the MSN in the Siemens ISDN telephone by selecting MSN A and
entering the number 1.
Program the MSN in the Philips ISDN telephone by selecting MSN A and
entering the number 2.
You can obtain information on programing the MSN in the operating manual for your
ISDN telephone. In most cases, you can access the MSN menu as follows:
With the M key (Menu), search for the «Installation» (for ISDN corded telephones) or
the «Basestation settings» / «Base settings» (for ISDN cordless telephones).
Then look up the menu for MSN settings and select MSN A. Enter the number
1 or 2 and confirm your entry with OK.
Operating Manual ISDN telephone adapter 57