Sharp SJ-GC680V Mode D'emploi page 8

Energy Saving
Use this feature when you want to switch the appliance to energy-saving operation.
To start operation
1
Press the select key and select Energy saving icon.
2
Press the key. [
3
Press the key.
Tips for saving energy
■
Keep the ventilation space as much as
possible around the refrigerator.
■ Keep your refrigerator out of direct sunlight,
and do not place next to heat generating
appliance.
■ Open your refrigerator door as briefly as
possible.
■ Hot foods should be cooled before storing.
■ Place the food evenly on the shelves to allow
the cooling air to circulate efficiently.
8
Flashing
: ON, : OFF ]
To cancel operation
It is the same method as starting operation.
Press the key in step 2.
NOTE
• While this feature is operating, the inside temperature of the
refrigerator and freezer compartment will be higher than the
preset temperature as follows ; R: about 1°C, F: about 2°C.
(If the preset temperature is set at R: 3°C, F: -18°C.)
The displayed temperature will not be changed.
• The efficiency of power saving depends on the usage
environment (controlling temperature, ambient temperature,
frequency of opening or closing the door, amount of food).
• Cancel this feature when you feel the beverages are not
cooled enough or ice making takes time.
The amount of power consumption of this model is measured
according to the international standard of the refrigerator
performance .
If the refrigerator is operated with these
accessories[Ice cube maker, Ice cube box]
taken out, it works under the most energy-
efficient condition.
• The amount of power consumption of this
model is measured with these accessories
taken out as indicated on the right figure.
• The amount of power consumption
of this model is measured under the
space dimensions on the right figure.
90
mm 60
mm
300 300
mm mm