Technical Features; Electrical Features; Performance; Installation - BSVILLAGE PISCINE Simpool Mode D'emploi

Simpool pH model
Programmable digital peristaltic pump

1.3 TECHNICAL FEATURES

1.3.1 ELECTRICAL FEATURES

For the power supply value we recommend reading the label on the pump!

1.3.2 PERFORMANCE

 Maximum height of the suction tube: 1.5 m
 Flow rate and backpressure: refer to the table below and read the label in the pump to identify the
corresponding model.
Codes
ADD100G00201003A000
ADD100D00101003A000
ADD300G00201003A000
ADD300D00101003A000
 Operating ambient temperature: 0 ÷ 45°C
 Transport and Packaging Temperature: -10 ÷ 50°C
 Protection rating: IP65

2.0 INSTALLATION

2.1 GENERAL RULES

Pump installation must be carried out as follows:

In vertical position with an uncertainty not greater than +/-15°.

Away from sources of heat in dry locations, at a maximum temperature of 40°C and a minimum of 0°C.

In a ventilated environment and easily accessible to an operator for periodic maintenance.

Above the level of the liquid that needs to be dosed, at a height of 1.5 metres maximum.

Do not install the pump above the tank when using liquids that emit fumes, unless it is sealed shut.

2.2 INSTALLATION KIT

When you purchase the pump, it includes everything required for correct installation, specifically:
 Bracket (code ADSP8000025);
 Plugs and screws (cod. ADSP6000041);
 pH 4.01 buffer solution (cod. ADSPH4);
 pH 7.00 buffer solution (code ADSPH7);
 Empty bottle to wash the pH probe (code ADSP4000020);
 PT100 temperature probe with 3 wires (optional, code ADSTS100N);
 Level Probe (optional, code ADSLG4);
 Foot strainer (*);
 2-in-1 injection probe-holder (code ADSP6000880);
 PVC suction and delivery tubes (*);
 pH electrode with 5 m cable (code ADELTPH055);
 O-rings and spacers, ring nut for the pH electrode (*);
 Drill bit Ø 24 (*);
(*) Kit components included in the ADSP6000631 code
ADSP7000407
Motor
Power supply
Type
230
230 VAC
VAC
230
230 VAC
VAC
230
230 VAC
VAC
230
230 VAC
VAC
rev. 1.2
INSTRUCTION AND MAINTENANCE MANUAL
Flow Backpressure
rate (l/h) (bar)
1.4 1
3 1
1.4 1
3 1
27/03/2015
ENGLISH
Peristaltic
PT100
Tube
X
Santoprene
X
Santoprene

Santoprene

Santoprene
43/313