Télécharger Imprimer la page

Forch 5424 360 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
LED Work Spotlight 360°
ENG
Please read these operating instructions before initial commissioning.
Scope of delivery
240 W LED Work Spotlight, Tripod, Bag, Operating Instructions
Technical data
LED / nominal power:
Luminous flux:
Light colour:
Version:
Beam angle:
Operating voltage:
Protection class:
Cable:
Protection class of the spotlight:
Operating temperature:
Dimensions of the spotlight (H × W × D): 710 mm × 270 mm × 270 mm
Weight of the spotlight:
Tripod:
For your safety
Keep the device away from water, naked flames and other sources of heat.
Do not make any changes to the device; any resulting damage is excluded from the
warranty.
Never use a device which is, or appears to be defective.
Make sure that the cable is not crushed. A defect cable may only be replaced by a quali-
fied electrician or a specialist company.
Make sure that the tripod has a stable and secure footing at all times!
Disconnect the power supply of the spotlight when not in use.
Warning: Do not look directly into the light when switched on. Never direct the beam of
light against people.
Note: The light serves for illumination of a workplace. It is not suitable for domestic room
lighting.
Non-observance of these safety instructions can lead to property damage and/or
personal injury! The user is liable for damage caused by improper use.
4 × 60 W SMD LED cluster = 240 W
24.000 lm (360°)
6,400 K
Rocker-type switch (100 % / 360° – off – 50 % / 180°)
360° or 180°
110 – 240 V, 50 / 60 Hz
I
5 m, H07RN-F3 × 1.5 mm²
IP54
-20 °C to +40 °C
10.1 kg
air-damped, extendible

Publicité

loading