Weka TR40 ANNA Instructions De Service page 28

3.2 Cutting Equipment
Max. saw blade diameter
Max. cutting depth
max. cutting speed
3.3 Design
1 Switch handle
2 Drive unit
3 Adjustable handle
4 Guard bow
5 Saw blade
6 Guide blade
7 Additional handle
8 Eccentric lever
9 Stand
10 Knob
11 Plug nipple
12 Ball valve, machine
13 Wing screw
14 Hexagon head screw
The complete sawing unit consists of the drive unit [2] with switching handle [1] and adjustable
handle [3]. The TR40 is provided electrically via the frequency converter FU6D/C. TR40 and FU6D/C
are water proof, i.e. on intended use no water can enter the motor.
3.4 Scope of delivery
Diamond ring saw with additional handle, drive wheel, frequency converter FU6D/C, adapter cable
(CEE-socket/shock-proof plug), combination spanner, face spanner and operators manual.
3.5 Noise emissions and vibration (EN 62841)
The typical A-weighted sound pressure level is 102 dB(A).
The typical A-weighted sound capacity level is 113 dB(A).
Uncertainty K =3 dB.
Vibration total values a
2
a <2,5 m/s , K=1,5 m/s
h
4. P R E P A R A T I O N
Be convinced that the machine has not been damaged in transit. Check that the nominal voltage is
the same as the voltage indicated on the rating plate.
4.1 Electrical connection
4.1.1 230 ~
Connect the TR40 via the frequency converter FU6D/C and via the adapter cable only on a properly
earthed shockproof socket. If required use only high quality extension cords with sufficient cross
section.
Up to 100m length - 3G2,5 quality, e.g. H 07BQ-F or H 07RN-F
4.1.2 400 3 ~
Connect the TR40 via the frequency converter FU6 only on a properly earthed shockproof socket. If
required use only high quality extension cords with sufficient cross section.
Up to 100m length - 4G2,5 quality, e.g. H 07BQ-F or H 07RN-F
mm
mm
m/s
(triax vector sum) and uncertainty K determined according to EN 60745-2-22
h
2
.
400
300
42
15 T-Knob
16 Cover
17 Support roller
18 Guide roller
19 Hexagon head screw
20 Drive wheel
21 Eccentric shaft
22 Plug nipple, FU6D/C
23 Power plug
24 Ball valve, FU6D/C
25 Connection socket
26 LED (FU6C)
27 Keypad (FU6D)
28 Display pane (FU6D)
24