Installing The Heat Sink - Dell OptiPlex 3080 Micro Instructions De Service

Steps
1. Loosen the three captive screws that secure the heat sink to the system.
NOTE: Loosen the screw in the sequential order (1,2,3) as printed on the heat sink.
2. Lift the heat-sink from the system board.

Installing the heat sink

Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.
38 Démontage et remontage