Dissipateur De Chaleur; Removing The Heat Sink - Dell OptiPlex 3080 Micro Instructions De Service

3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the
system board.
4. Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.
Next steps
1. Install the hard-drive assembly.
2. Install the front bezel.
3. Install the side cover.
4. Follow the procedure in

Dissipateur de chaleur

Removing the heat sink

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the fan assembly.
About this task
The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Démontage et remontage 37