Assembly - Blackstone 1575 Manuel De L'utilisateur

WARNING:
The manufacturer has made every effort to eliminate any sharp edges. However, you
should handle all components with care to avoid accidental injury. Tools required: The only tool
needed is a Phillips Screwdriver for minimal assembly on the cover and main body handles.

ASSEMBLY:

Please read all instructions thoroughly before proceeding. Find a large, clean area in which to
assemble your Patio Oven. Please refer to the parts list and assembly diagram as necessary. Patio
Oven assembly involves large components; therefore, it is advised to have two people set up the unit.
Make sure all the plastic protection is removed before assembling.
NOTICE:
to QR Code on front of manual for more assembly information.
Step 1
Remove main body and feet from packaging. Place main body upside down. Insert feet assembly.
VIDEO ASSEMBLY
Watch an actual BLACKSTONE Tailgater assembly. Use a QR Code App and
scan the QR code to the left. You will be taken to the Tailgater resource page.
You can also visit this page at www.blackstoneproducts.com/patio-oven
Main body
14
Refer