Setting The Push Rod - Avdel 74110 Manuel D'instructions

M a i n t e n a n c e
S e t t i n g t h e P u s h R o d
•
Apply shims and spacers to obtain a maximum axial clutch movement of 0.13mm
Note: Shims must be adjacent to face of Bit Holder
•
Apply pressure in direction of arrow (A)
•
Apply pressure to Push Rod (B) until a hard stop is felt. Measure dimension X.
•
Obtain the specified dimension by grinding the Push Rod (B).
B
7.2
7.0 mm
X
A
19