Switching Display; Station/Disc Naming (Snps/Dnps) - Kenwood KTS-MP400MR Mode D'emploi

General features

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display
switches as shown below.
In Tuner source
Information
Station name or Frequency
Frequency
Clock
In CD & External disc source
Information
Disc title (In External disc source or
KTS-MP400MR internal CD source)
Track title (In External disc source or
KTS-MP400MR internal CD source)
Track number & Play time
Disc name
Clock
In MP3/WMA source (KTS-MP400MR only)
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
In HD Radio source
Information
Station name
Song title/ Artist name/
Album name/ Genre
Frequency
Clock
In Weather Band Tuner source
Information
Frequency
Clock
12
|
English
Display
"SNPS"*
"BAND+FREQ"
Display
"D-TITLE"*
"T-TITLE"*
"P-Time"
"DNPS"
Display
"TITLE"*
"ALBUM"*
"FOLDER NAME"
"FILE NAME"
"P-Time"
Display
"Station Name"*
"Title"*
"Frequency"
In Auxiliary input source
Information
Auxiliary input name
Clock
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• Album name cannot be displayed in WMA file.

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
• Refer to the <Switching Display> (page 12) and select
either "DNPS" or "SNPS". No name can be attached to
the source if "DNPS" or "SNPS" cannot be selected for
it.
2
Enter name set mode
Press the [NAME SET] button for at least 2
seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character
position
Press the [4] or [¢] button.
4
Select the character type
Press the [3/8] button.
Each time the button is pressed the character
type switches as shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME SET] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.