Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Function
In this chapter, you'll find important information on the function of the device.
4.1 Overview
1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. View window
5 Operation and handling
5.1 Before/First Use of Your Ice Maker
1.
During transportation, the incline angle of the cabinet should not be over 45° .Do not turn
the Ice maker upside down. As this may damage the compressor and sealed system.
2.
Remove all packing material and carefully check your ice maker to ensure it is in good condition
and that there is no damage to the ice maker or power cord and plug.
3.
The Ice maker should be placed horizontally on a level surface. To ensure proper ventilation for
your Ice maker allow 150mm of space at the top, the back and on each side.
4.
Do not install the Ice maker near an oven, radiator, or any other heat source. Before using the
Ice maker for the first time, please wait 2 hours after positioning it, and keep the front lid open
for at least 2hours
5.
Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
Pure water is not allowed to be used on this unit, spring water is recommended.
7. Back front cover
8. Control Panel
9. Water tray
10. Evaporator
11. Ice shovel
12. Ice basket
26
Publicité
Table des Matières
