Télécharger Imprimer la page

Linea 2000 DO908DV Mode D'emploi page 34

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
DO908DV
10. Close the door and hold it in position while you attach the upper hinge (5) to the
upper left corner of the freezer with the 2 screws (1). Make sure that the door is
straight before fastening the screws.
11. Place the cover (6) onto the upper hinge.
USE
Remove all packaging materials and any promotional stickers before use.
Clean the inside of the appliance with lukewarm water and some bicarbonate or soda
(5ml for 0,5l water). Do not use any soap or detergent, as the smell may linger. Dry
thoroughly.
Temperature control
The thermostat is located at the back of the freezer and can be set to MIN. (cold),
NORMAL (colder) or MAX (coldest).
The temperature can be influenced by:
The room temperature
How often the door is opened
How may food there is in the freezer
The position of the appliance
Start-up
1. Wait 12 hours after installation to turn on the freezer.
2. Put the plug into the socket.
3. Turn the thermostat to the desired temperature setting.
4. Wait approximately 4 hours until the desired temperature is reached, before
putting food into the freezer.
Caution:
Do not freeze food again after it has been defrosted already.
34

Publicité

loading