Linea 2000 DO908DV Mode D'emploi page 32

DO908DV
• Only use the appliance for the purpose for which it is
intended.
• Before the first use, remove all packaging materials
and any promotional stickers.
• This appliance is heavy. Be careful when moving it.
• Do not make any adjustments to this appliance, this
could be dangerous.
• If there is electrical work that needs to be carried out
when installing the appliance, this should be done by a
qualified electrician or skilled person.
• Only store edible foods into the freezer.
PARTS
1. Housing
2. Removable wire shelf
3. Thermostat knob (at the back)
4. Adjustable legs
5. Cover for door hinge
6. Door
7. Gasket
8. Temperature sensor
Ice cube tray
INSTALLATION
Caution:
• Make sure that the appliance does not stand on the electrical cord.
• Parts that become warm should not be exposed. If possible, place the back of
the freezer close to a wall, but do keep the required distance for ventilation, as
indicated with the pin at the back of the appliance.
• After installation, leave the freezer for 12 hours before turning it on. This way the
refrigerant can settle.
1
2
3
4
32
5
8
6
7