Checking The Function And Setting The Camera; Maintaining And Cleaning The Reversing Video Camera; Troubleshooting; Warranty - Dometic GROUP WAECO PerfectView CAM29S Mode D'emploi

Checking the function and setting the camera

9 Checking the function and setting the camera
➤ Check the function of the camera after you have connected it to a monitor.
➤ Use the monitor picture to align the camera if necessary so that the picture on the
monitor is horizontal.
10

Maintaining and cleaning the reversing video camera

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these may
damage the product.
➤ Occasionally clean the product with a damp cloth.
11

Troubleshooting

The monitor ceases to display camera images.
The camera or the monitor may not be properly connected.
➤ Check all plug connections between the camera and the monitor.
➤ Make sure that the monitor is supplied with power.
12

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when you
send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
13

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
If you wish to finally dispose of the product, ask your local recycling centre or
M
specialist dealer for details about how to do this in accordance with the appli-
cable disposal regulations.
20
CAM29S
EN