Ferm FDSD-1800K2 Mode D'emploi page 5

SWING DRILL
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers. All
products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for many
years to come.
The numbers in the text refer to the diagrams
on pages 2 - 4.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine information
2. Safety instructions
3. Mounting accessories
4. Operation
5. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Voltage
Charger voltage
Charger frequency
Battery output
Charging time
Drill speeds
Max. torque (low speed)
No-load speed
Position I
Position II
Chuck
Weight (without battery)
Lpa (acoustic pressure)
Lwa (acoustic power)
Vibration
Ferm
Contents of packing
1 Swing drill
2 Batteries
1 Battery charger
17 Bits
1 Extension bit holder
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
Product information
Fig. A
1. Bit holder
2. Rotation lock ring
3. Speed selection switch
4. Pivot lock knob
5. Direction switch
6. Locking buttons
7. Battery
8. On/Off switch
9. Bit holder selection knob
2. SAFETY INSTRUCTIONS
Explanation of the symbols
18 V
230 V~
50 Hz
1,3 Ah
1-2 hours
2
7-9 Nm
0 - 350/min
0 - 900/min
1/4"
1.2 kg
88 dB(A)
99 dB(A)
2.5 m/s
2
 D enotesriskofpersonalinjury,loss
oflifeordamagetothetoolincase
ofnon-observanceofthe
instructionsinthismanual.
Indicateselectricalshockhazard.
The number of revolution of the machine
can be electronically set.
Do not use in rain.
Indoor use only.
Ni-Cd batteries can be recycled. Drop
them off at a disposal center for
chemical wastes, so that they can be
recycled or disposed of in an eco-
friendly manner.
GB
5