Panasonic NR-B29SG2 Mode D'emploi page 13

Drink Cool Mode
Features:
• Drinks can be cooled quickly in the freezer.
• This mode has a timer function, and can be set to beep when the timer reaches 5, 10,
15, 20, 25 or 30 minutes.
• Remove the bottles when the beep is heard. If bottles are left in the freezer for a long
time, their contents could freeze and the bottles might break.
Settings:
1. Press (lower) button for 5 seconds.
2. "dc" is displayed on the Freezer temperature display and "05" flashes on the Fridge
temperature display.
3. Press (upper) to adjust the time (05-10-15-20-25-30 minutes).
4. The selected time flashes on the display 3 times and a beep will be heard.
5. Countdown by minutes starts from the set time, and the remaining time flashes on the
display.
• To release Drink Cool Mode, press
• When the set time comes, a beep will be heard, and both of the display indication
(Example: "00" and "dc") flash until you press
Notes:
• When using this mode, check the temperature of the bottles regularly.
• When the bottles have cooled sufficiently, remove them from the freezer.
Screen Saver Mode
Features:
• While setting this mode, the backlight of the display can be turned off to save energy.
Settings:
1. Press for 3 seconds to set the automatic Screen Saver function.
2. If no operation is performed for 5 seconds and any door is not opened, the backlight of
the display is turned off with all other marks and characters remaining on the display.
• The selected modes and functions are maintained.
• To set the automatic Screen Saver to off and keep the backlight of the display on, press
for 3 seconds.
Notes:
• When the automatic Screen Saver function is set to on and the display backlight is
turned off for a while, the display backlight will be turned on again and the set functions
are indicated on the display, if any button is pressed or any door is opened.
• When the Screen Saver and Child Lock are set to on, the Screen Saver is activated.
Therefore, while both of the functions are activated, the display backlight will be turned
on again when any button is pressed or any door is opened.
Child Lock function
Features:
• Setting Child Lock can keep children from changing the settings while playing with the
buttons.
Settings:
1. Press (upper) and (lower) for 5 seconds to set Child Lock.
• While Child Lock is set, is lit.
• To release the mode, press
the mode that is currently set until Child Lock is released.
Notes:
• If electricity is interrupted or the power plug is removed, Child Lock is released.
(lower) button for 5 seconds.
(lower).
(upper) and (lower) for 5 seconds. You cannot change
13 13