Panasonic TY-FB9BD Mode D'emploi page 2

Safety Precautions
WARNING
•
Never attempt to disassemble or modify this product.
To avoid fi re, shock, or failure.
•
If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the display.
Switch off the display and unplug the power cord plug from the supply outlet.
To avoid fi re or shock, do not leave the power of the display turned on.
•
To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet.
•
Please contact our designated service department for installation or change of this Product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn power of the display off and
unplug the power cord plug from the supply outlet.
Handling Cautions
Do not touch connector contacts with hands directly.
•
To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object such
as a steel cabinet to discharge yourself.
Be sure to use the supplied cable or specifi ed parts for interconnection.
•
To avoid malfunction or failure, do not use parts other than those recommended.
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label ( 1 sheet )
(Affi x this label to the applicable slot of the rear
panel of the display.)
Screw × 4
Slot Nos. of the display unit that are compatible with terminal board attachments.
2 slots model
3 slots model
6
( be sure to observe )
Slot1, Slot2
Slot1, Slot2 [Slot3 is not compatible]
Terminal board replacement
Instructions