Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
which are inflamed, injured or swollen. If in doubt,
seek medical advice before use.
• caution! Never fall asleep while the heating pad is
switched on.
• Do not use the heating pad in bed.
• When in use, the electronic components in the switch
of the heating pad make the switch slightly warm. The
switch should therefore never be covered or placed on
the heating pad when it is being operated.
• Never switch the heating pad on when folded or
compressed, wedged between objects and never make
any sharp creases.
• This heating pad is not intended for use in hospitals.
• Never use the appliance if it is not working properly,
or if it has been damaged. Any intervention other than
cleaning and normal maintenance by the customer
must be carried out by an approved service centre.
• If the appliance is used for other purposes than
intended, or is it not handled in accordance with the
instruction manual, the full responsibility for any
consequences will rest with the user. Any damages to
the product or other things are not covered by the
warranty.
2 | introDuction
This heating pad is designed for warming the human
body. It allows you to apply targeted warmth. Heat
promotes the circulation and relaxes the muscles. This
heating pad is not intended for use in hospitals or for
commercial applications. In particular, it may not be
used on infants, small children, persons insensitive to
heat, helpless persons or animals. Our heating pads
made of breathable microfleece are very adaptable and
agreeable to the skin. They can also be used without
their fabric cover. The detachable switch allows the
pad to be cleaned in the washing machine (see cleaning
instructions). To avoid soiling or damaging the heating
pad, we recommend using a fabric cover, particularly
when applying essential oils and ointments.
3 | Before first use
Before you use the appliance for the first time, please do
as follows: carefully unpack the appliance and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. check the
appliance after unpacking for any damage, possible from
transportation. Never switch the heating pad on when
folded or compressed, wedged between objects and
never make any sharp creases. When used for the first
time, the heating pad may start to smell of plastic but
this will soon go away.
4 | safety system
This heating pad has a SAFETy SySTEm. This electronic
sensor technology prevents the entire surface of the
heating pad from overheating by automatically switching
off in the event of a fault. If the safety system switches
off the heating pad automatically as a result of a fault,
the indicator lamp is no longer illuminated even when
the heating pad is switched on. please note that, after a
fault has occurred, the heating pad can no longer be
used for safety reasons and must be sent to the service
address indicated.
5 | use
First check that the switch is connected to the heating
pad at the plug-in connection. plug the power cord into
the mains outlet. Switch on the heating pad using the
sliding switch on the right (see figure of switch). The
fastest way to warm up the heating pad is to initially
set the highest temperature setting. The setting can be
reduced later if necessary. To increase the temperature,
press the button
the button
. If you intend to use the heating pad for a
relatively long period of time, we recommend that you
select the lowest temperature setting.
O = Off
1
= minimum heat
2-5 = moderate heat
6
= maximum heat
6 | fast Heating
These heating pads have a fast heating
function which allows them to heat up
quickly within the first 10 minutes.
7 | automatic switcH-off
These heating pads have an automatic
switchoff function which stops the heat
supply approx. 90 minutes after switching
on the pad. The illuminated function
display then starts to flash. To operate the
heating pad again, you must first set the
sliding switch to zero. After about 5 seconds, it can be
switched on again. If the heating pad is no longer used
after the timed switch-off, it should be switched off
(sliding switch to position "0") or else unplugged from
the mains.
14
. To reduce the temperature, press
Publicité
Table des Matières
