Publicité
Les langues disponibles
Les langues disponibles
Stopping the appliance
Set the thermostat (n°4 on picture) on 0.
Set the commutator (n°1 on picture) on 0: the appliance is no longer functioning.
Let the device cool.
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
- Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity.
7. TECHNICAL SPECIFICATIONS
Model
Outside dimensions
Weight
Power
Nb element
Current
Volt
Wires colours correspondence
CW 12
400x600x570 mm
20 Kg
850 W
2
3.7 A
220-240 V ~
Phase
Neutral
Earth
Brown/Black/Grey
Blue
Yellow-Green
14
Publicité
