Publicité
Les langues disponibles
Les langues disponibles
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be
replaced by the manufacturer, its after sale service or any qualified person to avoid
any risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, entrust its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Commutator 4 positions (n°1
on picture) :
Position 0
Position 1
Position 2
Position 3
Green pilot light (n°2 on pic-
ture
Orange pilot light (n°3 on pic-
ture)
Thermostat (n°4 on picture)
Putting on
Turn on the commutator (n°1 on picture) on the wished position.
Turn on the thermostat control knob (n°4 on picture) on the wished temperature.
The orange pilot light (n°3 on picture) ignites. The machine is on.
Temperature setting
Set the temperature by positioning the thermostat control knob on the desired tem-
perature
Function
Stop
Top heating element only
Bottom heating element only
Top and bottom together
Machine is on (pilot on)
Machine is off (pilot off)
Warming
Temperature setting
13
Publicité
