Safety Instructions - SATA trueSun Mode D'emploi

Operating Instructions SATA trueSun
EN
1.4. Warranty and liability
The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff is employed.
■ When no personal protection equipment is worn.
■ Failure to use original spare parts, accessories and wear parts
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Assembly and disassembly

2. Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
The particular national requirements for the air transport of lithium ion
batteries must be observed.
2.1. Requirements regarding personnel
The LED lamp may only be used by experienced skilled workers and in-
structed persons from an age of 16 years who have thoroughly read and
understood these operating instructions. People whose reactions have
been adversely affected by drugs, alcohol, medication or by any other
means are prohibited from handling the LED lamp.
2.2. Personal Protection Equipment
Always wear the approved personal protective equipment when using the
LED lamp and during cleaning and maintenance.
2.3. Safety Instructions
General
■ Never shine the LED lamp into the eyes of living creatures.
■ Comply with the local regulations for safety, accident prevention, occu-
pational health and safety and environmental protection.
Installation site
■ Never install or use the LED lamp, battery and charger in explosion-risk
62