Kenwood KDC-BT39DAB Mode D'emploi page 18

BLUETOOTH®
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or
character ( * , #, +).
2 Press S / T to move the entry position.
1
Repeat steps
phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the
voice command to control the phone functions.
( Make a call using voice recognition)
BATT *
LOW/ MID/ FULL: Shows the strength of the battery.
SIGNAL *
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of
the current received signal.
* Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2
Speak the name of the contact you want to call or the
voice command to control the phone functions.
• Supported Voice Recognition features vary for each phone.
Refer to the instruction manual of the connected phone for
details.
• This unit also supports the intelligent personal assistant
function of iPhone.
14
2
and until you finish entering the
Delete a contact
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY], then press the knob.
3 Turn the volume knob to select a contact.
4 Press and hold the volume knob to enter delete mode.
5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then press the knob.
DELETE ONE: Selected name or phone number in step
DELETE ALL: All names or phone numbers in [CALL HISTORY] in step
6
Turn the volume knob to select [YES], then press the knob.
7
Press and hold to exit.
• To return to the previous setting item, press
• Not applicable for mobile phone that supports PBAP.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL],
then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
4
Press and hold one of the number buttons (1 to 6).
"STORED" appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in step
blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
3 is deleted.
2
is deleted.
.
2
and store a