First Installation; Thermostatic Head Installation On The Radiator Valve - Watts BT-TH02 RF Manuel D'utilisation

2. FIRST INSTALLATION

2.1 Thermostatic head installa-
tion on the radiator valve
You need first to select a brass adaptor nut
compatible with your TRV.
The BT-TH02 RF must be installed with
the axis in opened position, so you can
install it directly on the radiator valve before
power on the product (See steps drawings
on the right)
Nota: If the valve is closed, it may block the
operation of installation on the radiator.
In that case, you need to power on the
product (remove the strip of the batteries)
then follow this procedure:
• Go in the Parameters Menu number 10
by pressing and maintain the (
more than 5 seconds, and we will see
the following screen:
• Press the ( ) key to validate. You will
see OPEN. Wait the backlight extinction,
the motor will perform the completely
open move
6
Axis in opened
position for installation
) key for
Axis in closed
position
You can then install the product on the radiator
valve.
Push the (
to finish (Clos)
ENGLISH
EN
) key