Steinbach Classic 310 Notice Originale page 55

3. Attach a hose with a 32 mm diameter
to the "RETURN" connection and
fasten it with a hose clamp.
Screw the optional adapter for INTEX
pools/Steinbach 2" ext. thread x 1" int.
thread onto the return line
36
the valve head
clockwise.
Slide a hose with a 38 mm diameter
over the thread up to the stop of the
"RETURN" connection and fasten it with a hose clamp.
4. Connect the second end to the connection on the injection nozzle of the pool.
The return line is connected.
29
Connecting the pressure line
1. Push one end of the pressure hose
onto the pump outlet
2. Place a hose clamp
pressure hose. Using a Phillips
screwdriver PH1
the hose clamp clockwise to tighten
the hose clamp over the connection.
3. Place the second hose clamp over the
pressure hose.
4. Push the end of the pressure hose
onto the pressure line
on the valve head
5. Position the hose clamp on the
connection and tighten this one as
well with a Phillips screwdriver.
The pressure line
3
Connecting the suction line
Connecting the suction line with the self-fastening hose
- When using self-fastening hoses Ø 32 / 38 mm.
on
29
by turning
1
.
28
over the
15
, turn the screw on
34
connection
3
.
1
is connected.
15
29
16
14
14
15
17
27
1
28
1
55