Electrical Connection - Blomberg WSN 1412 LT Mode D'emploi

Electrical connection

The appliance is intended for connection to alternating current. The required
voltage (V) and frequency (Hz) are stated on the nameplate inside the
appliance. Power must be connected via an independent wall socket outlet.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or a similar qualified person in order to avoid a hazard.
Technical data
This appliance complies with CE marking regulations, directives and
standards. Low Voltage Directive 73/23/EEC.
EMC Directive 89/336/EEC.
8