Samsung 4 Série Mode D'emploi page 14


Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.

Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
● Native: Native Colour Space offers deep and rich colour tone.
● Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.

White Balance
You can adjust the colour temperature for more natural picture colours.
● R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour 'temperature' in the light areas by
changing the values of R, G, B. Recommended for advanced users only.
● Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone
You can emphasize the pink 'lesh tone' in the picture.
Changing the adjustment value will refresh the adjusted screen.
N

Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
❑
Picture Options
In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.
N

Colour Tone → Cool / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
N
Warm1 or Warm2 is only activated when the picture mode is Movie.

Size
You can select the picture size which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
T
● Auto Wide: Automatically adjusts the picture size to the 1:9 aspect ratio.
● 1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
● Wide Zoom: Magnify the size of the picture more than 4:3.
● Zoom: Magniies the 16:9 wide picture (in the vertical direction) to it the screen size.
● 4:3: This is the default setting for a video movie or normal broadcasting.
● Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals
are input.
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
N
In PC Mode, only 1:9 and 4:3 mode can be adjusted.
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the
N
picture up / down. Then press the ENTERE button.
Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture
N
up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ►button. Use
N
the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan
N
function.
English - 13