Technical Data; Installation Of The Unit; Placing Of The Unit; Condensate Outlet - Dantherm CDP 75 Mode D'emploi

1.1 Technical data

Working area – humidity
Working area – temperature
Air volume
Max. external pressure
Power supply
Max. ampere consumption
Max. power consumption
Refrigerant
Quantity of refrigerant
Sound level (1 m away from unit)
Weight
Dimensions – H x L x W
* Version 1x230V / 3x400V ** Version 3x230V / 3x400V

2. Installation of the unit

2.1 Placing of the unit

The CDP 75, 125 and 165 can be placed in one of the following ways::
1. The CDP 75, 125 and 165 can be placed direct on the floor. Make sure that there is enough place for the
drain outlet and the water trap
2. The CDP 75, 125 and 165 can be placed on shockabsorbing footstands. The footstands are available as
options on request.
3. The CDP 75 and CDP 125 can be mounted on the wall on suspension brackets. When mounting the units
onto a wall we recommend oscillation dampers to be fitted between the unit and the suspension brackets.
The suspension brackets are available as options on request.
In addition, unimpeded access to the inspection door should be ensured.
When the unit has been mounted the handles are to be fixed to the inspection door.

2.2 Condensate outlet

The condensate outlet is located on the air inlet side. The dehumidifier is delivered with a 0,5 m water hose which
is fixed to the 3/4" screw connector using the clip delivered with the hose. The water hose is led to a drain.
CDP 75
%RH 40 – 100
ºC 20 – 38
3
m /h 1500
Pa 170
V/Hz 1x230/50
A 9,5
kW 1.85
R407C
Kg 2,1
dB(A) 58
Kg 130
mm 650 x 1155 x 725 850 x 1300 x 900 975 x 1400 x 1010
13
CDP 125 CDP 165
40 – 100 40 – 100
20 – 38 20 – 38
2500 3600
230 240
1x230/50 3x230/50
3x400/50 3x400/50
14,0 / 7,6* 20,2 / 11,5**
3.2 4.3
R407C R407C
5,2 6,8
60 63
160 190