Description Of Function - Dantherm CDP 75 Mode D'emploi

1. Description of function

The CDP 75, 125 and 165 are working in accordance with the condensation principle. The humid air is drawn into
the unit by a fan. In the evaporator the air is cooled and when its temperature has fallen to below the dew point, the
water vapour condenses into droplets which are led to a drain. The dry cold air is then passed through the
condenser where it is reheated. As a result of the released evaporator heat and the working energy of the
compressor being turned into heat energy, more heat is returned to the air than was previously extracted. This extra
heat corresponds to an approximate increase in temperature of 5°C. The repeated circulation of air through the unit
reduces the relative humidity, giving very rapid but gentle drying.
Fresh air
inlet
Air inlet
Condensate outlet
Cover panel with
fan
Connection of water-
cooled condenser
Top cover panel
Control panel
section
Inspection door
12
Reset of HP and
thermal relay
Front cover
panel
Air outlet