Mains Connection; Programming The Keso Mozy Eco - KESO MOZY eco Manuel D'utilisateur

EN – User Manual KESO MOZY eco
Check that the polarity on Terminal 1 and 2 is not reversed on Connectors J1
and J2 otherwise your KESO MOZY eco will be destroyed!
Terminals J2/1 to J2/5 must be connected individually according to the dis-
tance of the corresponding switch. Terminal number J2/1 is the common earth
(GND -) for the external bolt contact (terminal J2/5), the door opening function
/ programming clock (terminal J2/4) and access control (terminal J2/3). Termi-
nals J1/2 and J2/2 are provided for an external appliance, for example KESO-
batchless or KESOdigiport 30.
1 2 3 4 5 6 7 8 9 1
10
J2
J1
MOZYeco
4.3.2.

Mains Connection

Run the three-conductor mains power cable from the KESO MOZY eco to the
nearest socket. Fit a standard plug to the end of the cable. Observe the colour
code, i.e. black to live, blue to neutral and yellow/green to earth. Connection to
a junction box must only be done by a professional.
10/2008
4.4.
Initial situation
The door is locked. Remove the 10-pin connector if it already wired up to the
power unit. The three-conductor cable is plugged into the mains.
Beware: If your locks bolt into the floor, the door must be closed.
Diagram
Dialog makes the KESO MOZY eco easier to program. Carry out the action
indicated in the rectangle and follow the arrows. Answer yes or no to the
question asked in the parallelogram, and then follow the arrow. Continue in
2 3 4 5 6 7 8 9
10
the same way throughout the programming sequence.
Checking the programming
The LED lights up red once the programming has been successfully completed
and the door locked.
Press the KESO MOZY eco button. The KESO MOZY eco unlocks the door and
the LED turns green. The LED is now indicating that the bolt is retracted and the
door is unlocked. Open the door for the door switch to emit a signal. Close the
door and the KESO MOZY eco will lock it automatically. If the door is locked
correctly, the LED remains permanently red.
suject to change without notice

Programming the KESO MOZY eco

Page 34 from 48 pages