General; Product Description; Introduction; Use - KESO MOZY eco Manuel D'utilisateur

EN – User Manual KESO MOZY eco
1.

General

You are advised to read this installation manual carefully before fitting. Every
possible installation is described in full detail in this manual. Do not hesitate to
contact one of the addresses on the front page if you have any questions
concerning installation.
2.

Product Description

2.1.

Introduction

2.1.1.

Use

The KESO MOZY eco system is designed for security and is used to lock and
unlock doors automatically. It is capable of imitating all the movements of a
normal key in a lock.
The KESO MOZY eco system can activate the following types of lock:
- Single or multi-turn locks
- Single or multi locking points
- With or without latch bolt
- Standard locks, hook locks, panic locks with no additional functions
- Can be used from a 35 mm broach size for outward-opening doors
2.1.2. Compatible Access Controls
All standard access systems using a potential-free contact as a control signal
are capable of activating the KESO MOZY eco (see example 7). The control
signal must not be shorter than 200 ms.
10/2008
2.1.3.

Simple Example of Operation

The entrance door to an apartment block is locked with the KESO MOZY eco.
The door is unlocked from the outside by means of external switches: key
switch, access control systems, etc.
By activating the key switch, it sends a pulse and unlocks the door. Once the
door is closed, KESO MOZY eco locks it automatically. The door can be opened
from the inside via a sensor installed on the KESO MOZY eco. Once the visitor's
identity has been verified, the door can be opened by remote control (from the
apartment) via an existing intercom.
2.1.4.

Power Cut

In the event of a power cut, the door can be unlocked from the outside via the
mechanical cylinder and from the inside via the turn knob. As soon as power is
restored, the KESO MOZY eco returns to normal operation automatically.
suject to change without notice Page 27 from 48 pages