English - Eschenbach economy visionLED Mode D'emploi

English

Safety instructions
X Risk of dazzling and injury! Do not look at the light source for long periods!
X Protect your desk lamp from impact or shock, moisture and excessive heat!
Never place your desk lamp near a heat source or in direct sunlight.
X Do not use the desk lamp near containers filled with water!
X Risk of tripping! Make sure that the power cord is not posing a danger!
Do not wrap the power cord around the table lamp!
X Ensure that other people, particularly children, are aware of these risks!
Operating elements
q Stand
w Lamp head
e Arm for adjusting the lamp head
r Support arm for the lamp head
t Joint to adjust the support arm for the lamp head
y Socket for the power cord plug
u Color temperature toggle switch M
button: switching on and off
i
button: increase brightness
o
button: decrease brightness
a
Starting up
1. Set the desk lamp on a flat and stable surface.
2. Plug the connector of the supplied power cord into the socket y at the rear of the lamp
base.
3. Insert the mains plug of the cable into a properly wired electrical outlet.
4. Gently tap the touch button
of lit LEDs is normal.
5. Use the touch buttons
o to increase the brightness in 5 steps. Repeatedly tap briefly
the brightness in 5 steps.
6. Tap on the toggle switch M u repeatedly to switch through the 3 available color
temperatures:
2800 K, provides a yellowish warm-white light.
3850 K, provides a yellowish-white light.
4900 K, provides a slightly blue-white light.
7. Adjust the lamp head w and its support arm e to suit your requirements.
8. To disconnect the unit from the mains power supply, unplug the power cord from the
wall outlet.
i to turn the lamp on or off. A slight warming in the area
o and a to adjust the brightness. Repeatedly tap briefly
- 6 -
a to decrease