Technical Data; Disposal - BOMANN KM 1393 CB Mode D'emploi

Troubleshooting
The appliance cannot be switched on or stops operation.
Possible Cause:
Appliance without power supply.
Remedy:
- Check the socket with another appliance.
- Connect the power plug (10) properly.
- Check the fuse.
Possible Cause:
The swivel arm (2) is not locked in the lowest position.
A safety switch prevents operation.
Remedy:
Push the lever (3) and the swivel arm (2) at the same time
until the arm locks.
Possible Cause:
The appliance is too hot. The overheat protection has been
activated.
Remedy:
Let the appliance cool down.
Possible Cause:
The appliance is defective.
Remedy:
Contact our service center or a specialist.
Specifications
Model:....................................................................KM 1393 CB
Power supply:.........................................220-240 V~, 50/60 Hz
Power consumption: .....................................................1000 W
Protection class: ...................................................................... II
Net weight: ....................................................... approx. 3.80 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
34
KM1393CB_IM

Disposal

Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Dispose of obsolete or defective electrical
appliances via municipal collection points.
Please help to avoid potential environmental
and health impacts through improper waste
disposal.
This will contribute to the recycling and other forms of reuti-
lization of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
10.05.16