Error Messages - Miele Triflex HX1 Mode D'emploi

en

Error messages


Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Error messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem
Bottom light flashes
quickly
Bottom and middle
lights flash quickly
Middle and top lights
flash quickly
Top light flashes quickly "Comfort handle not recognised" error
56
Cause and remedy
Internal system error
 Remove the battery, wait for 10 seconds, reinsert
it and charge it.
"Battery overheating" error
 Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
"Battery not recognised" error
 Insert an original Miele AP01 lithium-ion re-
chargeable battery (HX LA) .
 Remove the Comfort handle and reconnect it (see
"Installation and connection" – "Connecting the
Comfort handle").
 Remove the battery, wait for 10 seconds and rein-
sert it.